| Availability: | |
|---|---|
| Quantity: | |
Product Description
Trapezoidal Tooth Timing Belts
Trapezoidal tooth Timing Belts with tooth mesh to transfer power, it is a new type of synchronous transmission mode.
Properties
- Temperature range from -20 °C to +100 °C depending on application
- Conditionally resistant to oil,Ozone-resistant,Resistant to aging
- Suitable for reverse flexing/reverse tensioning idlers
- not need lubrication ,no slip ,no pollution, less noise,-Maintenance-free
- The transmission efficiency of more than 98%, speed ratio range can reach 1：10,
- Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive.
Table 1
| TYPE | Tooth Pitch | Tooth angle | Bottom tooth | Tooth height | Fillet | Tip | Belt thickness | Teeth number range | pitch length | ||
| Pb | 2y° | s | hg | rr | ra | H | |||||
| MXL | 2.032 | 40 | 1.14 | 0.51 | 0.13 | 0.13 | 1.14 | 43～2044 | 87.38～4153.41 | ||
| XXL | 3.175 | 50 | 1.73 | 0.76 | 0.20 | 0.20 | 1.52 | 46～124 | 146.05～393.70 | ||
| XL | 5.080 | 2.57 | 1.27 | 0.38 | 0.38 | 2.3 | 22～510 | 111.76～2590.80 | |||
| L | 9.525 | 40 | 4.65 | 1.91 | 0.51 | 0.51 | 3.6 | 23～530 | 219.08～5048.25 | ||
| H | 12.700 | 6.12 | 2.29 | 1.02 | 1.02 | 4.3 | 29～440 | 368.30～5588.00 | |||
| XH | 22.225 | 12.57 | 6.35 | 1.57 | 1.19 | 11.2 | 53～220 | 1177.93～4889.50 | |||
| XXH | 31.750 | 19.05 | 9.53 | 2.29 | 1.52 | 15.7 | 56～144 | 1778.00～4572.00 | |||
Table 2
TYPE | Tooth Pitch | Tooth angle | Bottom tooth | Tooth height | Fillet | Tip | Belt thickness | Teeth number range | pitch length | ||
| Pb | 2y° | s | hg | rr | ra | H | |||||
| T2.5 | 2.5 | 40 | 1.50 | 0.70 | 0.2 | 0.2 | 1.3 | 42～312 | 105.00～780.00 | ||
| T5 | 5.0 | 40 | 2.65 | 1.20 | 0.4 | 0.4 | 2.2 | 30～400 | 150.00～2000.00 | ||
| T10 | 10.0 | 40 | 5.30 | 2.50 | 0.6 | 0.6 | 4.5 | 34～536 | 340.00～5360.00 | ||
| T20 | 20.0 | 40 | 10.15 | 5.00 | 0.8 | 0.8 | 8.0 | 61～181 | 1220.00～3620.00 | ||
| AT5 | 5 | 50 | 1.20 | 2.70 | |||||||
| AT10 | 10 | 50 | 0.50 | 5.00 | |||||||
| AT20 | 20 | 50 | 5.00 | 8.00 | |||||||
