| Availability: | |
|---|---|
| Quantity: | |
Product Description
Trapezoidal Tooth Timing Belts
Arc Timing Belts with tooth mesh to transfer power, it is a new type of synchronous transmission mode.
Properties
- Temperature range from -20 °C to +100 °C depending on application
- Conditionally resistant to oil,Ozone-resistant,Resistant to aging
- Suitable for reverse flexing/reverse tensioning idlers
- not need lubrication ,no slip ,no pollution, less noise,-Maintenance-free
- The transmission efficiency of more than 98%, speed ratio range can reach 1：10,
- Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive.
Table 1
TYPE | Pitch | Tooth angle | Bottom tooth | Tooth height | Fillet | Tip | Belt thickness | teeth number range | pitch length | ||
| Pb | 2y° | s | hg | rr | ra | H | |||||
| 3M | 3.0 | 14 | 1.78 | 1.17 | 0.24-0.3 | 0.87 | 2.40 | 35～1000 | 105.00～3000.00 | ||
| 5M | 5.0 | 14 | 3.05 | 2.06 | 0.40-0.44 | 1.49 | 3.80 | 35～852 | 175.00～4260.00 | ||
| 8M | 8.0 | 14 | 5.15 | 3.36 | 0.64-0.76 | 2.46 | 6.00 | 36～565 | 288.00～4520.00 | ||
| 14M | 14.0 | 14 | 9.40 | 6.02 | 1.2-1.35 | 4.50 | 10.00 | 56～340 | 784.00～4760.00 | ||
| 20M | 20.0 | 14 | 14.00 | 8.4 | 1.77-2.01 | 6.50 | 13.20 | 100～260 | 2000.00～5200.00 | ||
Table 2
TYPE | Pitch | Bottom tooththickness | Tooth height | Fillet | Tip | Belt thickness | teeth number range | pitch length | |
| Pb | s | hg | rr | ra | H | ||||
| S2M | 2.0 | 1.30 | 0.76 | 1.30 | 0.20 | 1.36 | 44～1914 | 88.00～3828.00 | |
| S3M | 3.0 | 1.95 | 1.14 | 1.95 | 0.30 | 1.94 | 41～500 | 123.00～1500.00 | |
| S4.5M | 4.5 | 2.93 | 1.71 | 2.93 | 0.45 | 2.81 | 40～201 | 180.00～904.50 | |
| S5M | 5.0 | 3.25 | 1.91 | 3.25 | 0.50 | 3.41 | 30～560 | 150.00～2800.00 | |
| S8M | 8 | 5.20 | 3.05 | 5.20 | 0.80 | 5.30 | 53～500 | 424.00～4000.00 | |
| S14M | 14 | 9.10 | 5.30 | 9.10 | 1.40 | 10.20 | 69～322 | 966.00～4508.00 | |
